Gefen ex-tend-it 4x4 HDTV Matrix Manual do Utilizador

4x4 HDTVMatrixUSER MANUALwww.gefen.com

7IR CODESIn the event of IR confl icts, please do the following:1. Remove the battery cover from the back of the RMT16-IR remote.2. Locate the Dip Swit

RS-232 INTERFACE8Binary TableASCII Corresponding RMT16-IRButtonBinary ASCII CorrespondingRMT16-IRButtonBinary1 1 0011 0001 9 9 0011 10012 2 0011 0010

4x4 HDTV MATRIX RACK MOUNT DIAGRAM9

Video Amplifi er Bandwidth ... 1.65 Gbps Input Video Signal ...

DDCShort form for Display Data Channel. It is a VESA standard for communication between a monitor and a video adapter. Using DDC, a monitor can inform

Technical Support:Telephone (818) 772-9100 (800) 545-6900Fax (818) 772-9100Technical Support Hours:8:00 AM to 5:00 PM Monday through Friday.Writ

TABLE OF CONTENTSIntroduction / Operation NotesFeaturesPanel LayoutUsing the 4x4 HDTV MatrixRMT16-IR InstallationDip Switch GuidelinesIR CodesRS-232 I

INTRODUCTIONThank you for purchasing the 4x4 HDTV Matrix.The 4x4 HDTV Matrix switches four HDTV sources to any four DVI displays. The 4x4 HDTV Matrix

2FEATURESFeatures• Allows any DVI/HDMI display to view any source at any time• Allows any source to be displayed on multiple displays at the same ti

PANEL LAYOUT3Display 1 LED IndicatorFront PanelRS232 Controller PortDisplay 2 LED IndicatorDisplay 3 LED IndicatorDisplay 4 LED IndicatorIR SensorIR E

Connect all the sources to the HDMI inputs on the 4x4 HDTV Matrix, using the supplied cables. Connect the HDMI/DVI displays to the outputs on the 4x4

5RMT16-IR Installation1. Remove battery cover from the back of the RMT16-IR remote.2. Verify that dip switches 1 & 2 are in the down (OFF) positio

6DIP SWITCH GUIDELINESExtended display identifi cation data (EDID) is a data structure provided by a display to describe its capabilities to any source